PETG itself has good ductility, and it can maintain a certain degree of ductility and impact resistance while bearing higher CF loads. It can adhere well to various construction platforms and also has excellent layer adhesion, and the addition of carbon fiber not only increases its rigidity and dimensional stability.
Contact NowPETG-CF
ForceTracer™ PETG-CF is a polyethylene terephthalate-1,4-cyclohexanedimethanol (PETG) material with chopped carbon fibers added, with a black, slightly glossy appearance. The addition of carbon fiber increases the stiffness of the material and reduces warping deformation. The material has good fluidity and low shrinkage. It performs well even when printing larger models, and can be used in areas such as normal temperature molds .
PETG-CF 3D printing performance parameters:
performance Property | numerical value Parameter Value | unit Unit | Test Methods Test Method |
Young's modulus/Tensile modulus | 1500 | MPa | ISO 527, Type 1A |
Tensile strength/Tensile strength | 45 | MPa | ISO 527, Type 1A |
Elongation at break/Elongation at break | 9 | % | ISO 527, Type 1A |
Bend modulus/Bend modulus | 1732 | MPa | ISO 14125 |
Bend strength | 65 | MPa | ISO 14125 |
Notched impact strength/Notched impact strength | 7 | kJ/㎡ | ISO 180 |
Particle printing temperature: 140-180℃ from feed to nozzle
Drying temperature: 60-70℃ 4-6h
Precision flow control particle 3D printing equipment
High cavity temperature particle 3D printing equipment
Multi degree of freedom robotic arm 3D printing equipment
